SPECIFICATIONS

Battery Included: No

Brand Name: NoEnName_Null

Hign-concerned Chemical: None

Material: Metal

Model Number: H3

Origin: Mainland China

Style: flint

Use: TORCH

worthy of remark

Due to transportation requirements, the lighter does not have gasoline

How to operate inflation correctly

Before inflating, use a small tool to hold the inflation core and completely release the remaining gas inside to release the pressure in the lighter cylinder;

2. Press the outlet of the gas cylinder vertically downwards for about 5 seconds each time, two to three times is enough.

After inflation is complete, please wait for about 3-5 minutes before use. If the ignition still hasn't started after 5 minutes, please add a regulating valve. (Note+-) direction.

For more detailed information, please refer to the following detailed introduction.

Special reminder: In high-altitude areas above 1000 meters, the use of inflatable windproof and direct impact lighters may be affected. The decrease in ignition rate is significant, so please be cautious when choosing a windproof direct impact lighter. Try to use open flames and kerosene lighters as much as possible.

Detailed Introduction to Inflation:

Inflation method?

When refueling, there should be no sparks or open flames around to ensure safety. Do not smoke when refueling;

2. Qualified butane gas should be used, as inferior gas may damage lighters or shorten their lifespan;

When refueling regular models, please invert the lighter, align and cover the outlet of the gas cylinder with the inlet of the lighter, apply pressure several times, and hold for about 2 seconds each time; If it cannot be inflated, it may be due to excessive air remaining in the cylinder. At this point, you can deflate by aligning a small screwdriver with the air intake and quickly releasing it 1-2 times before refueling;

When refueling the Langsheng machine, please first use a Phillips screwdriver or other tool to loosen the intake screw cover, and then follow the above steps. After refueling, the screw cover should be turned flat and not too tight; Otherwise, it will cause the engine hood to loosen, the engine hood sound to be unclear, and also allow gas to enter