Why choose our product?

1:Our V0.1 Green Youth Edition:Gemini motherboard is self-contained on the computer, no need to purchase a separate Raspberry Pi, etc.

The main board supports48Vhigh voltage input, you can expand your own touch screen, USB camera, accelerometer and many other expansion features.

2:V6 hotend iscustomized, the maximumtemperature of 350 °, bimetallic throatthree-hole nozzle.

3: Important point:built-in system, the machine is assembled directly into the debugging printing process, support for printing PLA/PETG/ABS/PA and other materials, technical support is provided, no worries.

4: We send the kit contains a set ofABS 3Dprinting parts.

Note:

The system card emphasizesthat do not format, connected to the line power connected to the wifi can be used.

Product Shipping List:

V6 Hotend:Youth version V0.1

Shipping List:

(EXTRA PARTS):

PVC Stickers,three colors *1pcs

Screwdriver Set * 6pcs

Cable Ties *20pcs

Nylon Cable Sleeving *2pcs

Nylon Wrap-Around Cable Sleeving 10mm *1pcs

Solder Rings, Blue 10pcs, Red 10pcs* 1pcs

XH2.54 Reed* 100pcs

XH2.54 plastic shell *15pcs

Full set ABS Printed parts *1pcs

Solder Iron *1pcs

(Fasteners):

CNVORON 0.1 full set of screws Stainless steel * 1sets

(Motion):

F623-RS Bearing * 24 pcs

MGN7H Linear Rail with Carriage - 150mm *5pcs

GT2 20T (5mm ID 6mm W) *2pcs

GATES GT2 Open Belt (6mm W) - 3000mm *1pcs

T8x8 Anti-backlash Flange Nut *1pcs

Motor cable *4pcs

Red-Black cable *2pcs

2*4 Teflon tube *1pcs

Frame(CNVORON 0.1 full set of profiles black oxide * 1set):

CNVoron Official Aluminum Profile 15x15 200mm*16pcs

CNVoron Official 15x15 100mm *3pcs

(Miscellaneous(:

Little Rubber Feet,14*11*9 * 4pcs

6mm x 3mm Round Neodymium Magnets *8pcs

(Cables):

XYZ motor cable * 1pcs

Thermal Fuse 125C * 1pcs

7mm x 7mm cable chain (less than 1/2 meter needed) * 1pcs

(Panels):

Acrylic Sheet Clear - 212x230x2.5mm *2pcs

Acrylic Sheet Clear - 212x239x2.5mm *1pcs

Rear Panel 212mm x 248mm *1pcs

Deck Panel 3mm thick *1pcs

Motor Panel 3mm thick *1pcs

Mid Panel 3mm thick *1pcs

Tophat - Top Panel 180x211mm *1pcs

Tophat - Front/Rear Panel 206x73mm *2pcs

Tophat - Side Panel *2pcs

(Bowden):

Bowden Fitting *2pcs

(Buildplate):

Hotbed - 120x120mm *1pcs

Magnetic printing platform *1pcs

yellow die springs 8x4x20mm *3pcs

(Extruder):

NEMA14 36mm pancake Motor with 10 tooth gear *1pcs

BNG extrusion wheel *1pcs

Miniature needle roller bearing *2pcs

Hand screw *1pcs

Stainless steel spring *1pcs

Black gasket *1pcs

5mm pin with 30 teeth plastic gear *1pcs

3mm pin *1pcs

MR85 bearing *2pcs

This contains only one set of CNC metal construction parts