Description:

Product name: Automobile tire repair tool set

Packaging size: 9.45*5.31*0.59in/24*13.5*1.5CM

Color: As Shown In The Picture

Product size:

Thread drill: 5.12*3.15in/13*8cm

Fork drill: 5.04*3.15in/12.8*8cm

Tire repair strip: 3.94*2.76in/10*7cm

Glue: 3.23*1.10in/8.2*2.8cm

Material: stainless steel metal + rubber

Product features: can be used for cars, motorcycles, and electric vehicles.

Thread drill: clockwise rotating thread design, easy to penetrate the tire, clear the debris inside the tire.

Fork drill: Made of high-strength steel, it is exquisite, rust-free and has good toughness. The rubber handle is comfortable and durable.

Tire repair strip: It is made of butyl rubber and natural rubber vulcanization, not easy to age and harden, and has good air tightness.

Glue: If a little air leakage is found after the tire is repaired, it can be filled and bonded with tire repair glue.

Instructions for use:

1. Mark the circle number of the position where the tire needs to be repaired and pull out the puncture.

2. Use a tire repair probe to find the direction of the puncture, and insert it clockwise to clean the dust in the puncture.

3. Cut one end of the rubber strip into an oblique mouth and pass it into the front hole of the pin tool, so that the length of the rubber strip at both ends of the hole is basically the same.

4. Insert the pin with the rubber strip into the tire along the puncture, ensure that the rubber strip is inserted to 2/3 of the length, and rotate the pin 360 degrees before pulling out the pin.

5. Cut off the tire repair strip outside the tire.

Package Includes:

1 x Thread Drill

1 x Fork Drill

5 x Tire Repair Strips

1 x Glue

Note:

1. Please note that the photo does not show actual size, please refer to Description for size details.

2. Please allow differences due to manual measurement, thanks.

3. Due to the difference between different monitors, the image may not reflect the actual color of the item.